ACCESSORIES
UNLOCKING/LOCKING THE
PASSENGER SEAT
◆
Place the vehicle on the stand, see page
60 (PLACING THE VEHICLE ON THE
STAND).
◆
Insert the key (1) into the seat lock.
◆
Release the passenger seat (2) from the
grab strap (3).
◆
Turn the key (1) anticlockwise.
◆
Raise the front end of the passenger
seat (2).
◆
Withdraw the passenger seat (2).
NOTE
Before lowering and locking the
seat (2), make sure that you have not left
the key in the glove/tool kit compartment.
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
30
To lock the seat (2), proceed as follows:
◆
Slide the hooks (4) placed at the rear
end of the passenger seat underneath
the frame tube (5) of the rear subframe.
◆
Push the passenger grab strap (3)
forward and lower the front end of the
seat. Make sure to set the grab strap in
3
2
the correct position.
◆
Press down on the front end of the seat
so that the lock becomes engaged.
1
M a k e s u r e t h e s e a t ( 2 ) i s l o c k e d
securely before riding.
N O T E
approved in the single-seater configuration
for the
m a r k e t v e r s i o n i s n o t f i t t e d w i t h a
passenger seat.
WARNING
T h e
v e r s i o n i s o n l y
market. The corresponding
3
4
The tail of the vehicle accommodates a
convenient glove / tool kit compartment,
which is accessed by removing the
compartment cover.
NOTE
The glove/tool kit compartment
c o v e r c a n o n l y b e u s e d w h e n t h e
passenger seat (2) is removed and vice
versa.
To use the vehicle with the glove/tool kit
compartment cover it is necessary to
remove the passenger seat as previously
described.
See page 31 (UNLOCKING/LOCKING
THE GLOVE/TOOL KIT COMPARTMENT
COVER) for installation instructions.
2
5