APRILIA RSV 1000 R Factory Use And Maintenance Book page 19

Description
Speedometer (km/h - MPH)
Odometer ( KM - Mi)
Coolant temperature
(°C/°F)
Multifunction
digital display
Clock
Battery voltage
V BATT
Lap timer
Diagnostics
Function
Can be set to display current, average or maximum road speed (in kilometres
or miles) see page 20 (MULTIFUNCTION COMPUTER).
Gives total distance covered or distance covered since the trip meter
was last reset (in km or miles)
Indicates engine coolant temperature, see page
COMPUTER) .
Do not leave the ignition switch set to " ", as this
CAUTION
will stop the cooling fans regardless of coolant
temperature. Consequently, temperature will rise further.
When temperature rises up to the danger zone, stop the engine, turn the
ignition key to " " and wait until the cooling fans switch off.
Now turn the ignition key to "
(COOLANT).
Official dealer
Contact an aprilia
Exceeding the maximum coolant temperature
CAUTION
allowed (115 °C - 239 °F) may lead to severe
engine damage.
Gives hours and minutes in accordance with selected settings, see page 20
(MULTIFUNCTION COMPUTER).
Indicates battery voltage, see page 20 (MULTIFUNCTION COMPUTER).
Indicates the various time measurements in accordance with selected
settings, see page 20 (MULTIFUNCTION COMPUTER).
Each time the ignition switch is set to position " ", the wording "
of the multifunction display for approximately three seconds.
If the wording "
CAUTION
means that the Engine Control Unit has detected an anomaly. In
most cases, thengine will keep running, although performance will be somewhat
reduced. Contact an aprilia
.
20 (MULTIFUNCTION
" and check coolant level, see page 42
.
" appears during normal engine operation, it
Official dealer
immediately.
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
To cycle
through display
readouts, see
page 20 (MUL-
TIFUNCTION
COMPUTER)
" appears on the right side
19