CAUTION
On refitting, ensure that the lens locates
properly into its slot. Tighten the screw
(1) gradually. Do not overtighten or the
shield will damage.
◆
Push down the bulb (3) gently and twist
anti-clockwise.
◆
Extract the bulb (3) from its seat.
CAUTION
When fitting the bulb, ensure that the
two locating pegs locate properly into
the slots in the bulb holder.
◆
Install a new bulb of equal rating.
1
CAUTION
If the reflector (4) comes off its seat,
refit it correctly.
REPLACING THE NUMBER PLATE
LIGHT BULB
Read page 106 (BULBS) carefully.
◆
Place the vehicle on the stand, see page
60 (PLACING THE VEHICLE ON THE
STAND).
◆
Remove the passenger seat / glove/tool
kit compartment cover, see page 31
( U N L O C K I N G / L O C K I N G
GLOVE/TOOL KIT COMPARTMENT
COVER).
4
3
5
Never pull on the wiring to extract a
bulb holder.
◆
Extract the number plate light bulb holder
(5).
◆
Remove the bulb and fit a new one with
equal rating.
NOTE
Ensure that the bulb locates
correctly into the bulb holder.
T H E
use and maintenance RSV 1000 R - RSV 1000 R FACTORY
CAUTION
109