4-4
Diagnostics
d02 Purchase Status
This diagnostic displays the status of subscriber event purchases on the OSD and LED. The
OSD and LED information displays are updated each time this diagnostic is displayed:
PURCHASES
IPPV STATUS:
Figure 4-3
LED display for PURCHASE STATUS diagnostic
The Purchase Status fields are:
Field
Description
Unsent
The number of purchases in the DCT remaining to be polled. It can be an integer from 0 to 63.
Unack
The number of reports that have not been acknowledged by the controller. It is an integer.
Last Seq Num
The last acknowledged sequence number of a purchase sent by the controller. It is a 16 bit
unsigned hexadecimal number.
Last RB Time
The last time the DCT6400 attempted to report back purchases to the controller, in GPS
seconds.
IPPV Status
If IPPV is enabled, the IPPV status indicator LED is on. If IPPV is disabled, the IPPV status
indicator LED is off.
DCT6400 Phase III Installation Manual
PURCHASE STATUS
UNSENT:
xx
UNACK:
xx
LAST SEQ NUM:
xxxx
LAST RB TIME:
xxxxxxxxxx
Enabled
Purchase indicator
MUTE
On when
IPPV
is
enabled
P
MUTE
Number of unsent
purchases