Purchase Status; Figure 4-3 Front Panel Display For Purchase Status Diagnostic - Motorola DCH6416 Installation Manual

4 DIAGNOSTICS

Purchase Status

This diagnostic displays the status of subscriber event purchases on the OSD and
front panel. The displays are updated each time this diagnostic is viewed:

Figure 4-3 Front panel display for Purchase Status diagnostic

The Purchase Status fields are:
Field
Unsent
Unack
Last Seq Num
Last RB Time
IPPV Status
Prep CMD
Prep ACK
Purchase indicator
On when IPPV is enabled
Description
The number of purchases in the DCH remaining to be polled. It can be an integer
from 0 to 63.
The number of reports that have not been acknowledged by the controller. It is an
integer.
The last acknowledged sequence number of a purchase sent by the controller. It is
a 16-bit, unsigned hexadecimal number.
The last time the DCH6416 attempted to report back purchases to the controller, in
GPS seconds.
If IPPV is enabled, the IPPV status indicator is on. If IPPV is disabled, the IPPV
status indicator is off.
"Last Prepare for Poll Command" sequence number and time of the last prepare for
poll request command that was sent by the controller. Note that each requesting
process maintains an independent sequence of poll requests to uniquely identify
the poll responses.
"Last Prepare for Poll Acknowledge" sequence number and time of the last Report
Number of unsent purchases
28