Motorola DCT6400 Phase III Installation Manual page 50

4-18 Diagnostics
Field
Hard Drive Status
Smart Card
HDMI Port
Device Connected
Repeater
Video Xmission
(transmission)
HDCP Enabled
Video Constrained
Output Format
Aspect Ratio
EDID Data
DCT6400 Phase III Installation Manual
Description
INST (installed) or NOT INST (not installed)
INST (installed) or NOT INST (not installed)
If a device is connected to the HDMI port only, the following diagnostics display to
help troubleshoot the HDMI interface. They all display "N/A" if no device is connected
to the HDMI port or the value is invalid or cannot be retrieved.
Indicates whether a device is connected to the HDMI port — Yes or No.
Indicates whether the connected device is a repeater — Yes or No.
Indicates whether the DCT6400 is transmitting video over the HDMI port — Not
Active or Active.
Indicates whether the DCT6400 is using HDCP to encrypt video transmitted over the
HDMI link — Yes or No. If the Video Xmission status is Not Active, the HDCP
Enabled status is No.
Indicates whether the DCT6400 is constraining the video sent through HDMI — Yes
or No. If the Video Xmission status is Not Active, the Video Constrained status is No.
Indicates the timing format of the video sent through HDMI:
1920 x 1080I — 1920 pixels wide by 1080 pixels high, interlaced
1280 x 720P — 1280 pixels wide by 720 pixels high, progressive
720 x 480P — 720 pixels wide by 480 pixels high, progressive
720 x 480I — 720 pixels wide by 480 pixels high, interlaced
640 x 480P — 640 pixels wide by 480 pixels high, progressive
Indicates the aspect ratio of the video sent through HDMI — 3:4 or 16:9.
Indicates the video timing formats that were read from the Extended Display
Identification Data (EDID) registers for the connected device, in particular the
detailed timing description blocks. The list displays all of the formats that the
DCT6400 could read up to a maximum of 12 formats. If the DCT6400 cannot read
any formats, EDID Data is blank. An asterisk (*) after the aspect ratio means the
DCT6400 supports the format. If more than twelve video timing formats are
discovered, the supported formats only are listed first followed by any remaining
formats, up to twelve.