Motorola DCT6400 Phase III Installation Manual page 57

The fields are:
Field Description
DOCSIS Enabled For a DOCSIS-enabled set-top, YES. Otherwise, NO.
Acquire DS The DOCSIS downstream channel acquisition status:
Channel
YES — The downstream channel is acquired
NO — The set-top is acquiring the downstream channel
N/A — The value is invalid or cannot be retrieved or DOCSIS is not enabled
Obtain US The DOCSIS upstream channel descriptor (UCD) acquisition status:
Parameters
YES — The UCD is acquired
NO — The set-top is acquiring the UCD or the downstream channel
N/A — The value is invalid or cannot be retrieved or DOCSIS is not enabled
Establish IP Displays whether the cable modem has acquired its IP address, typically from a Dynamic
Connectivity Host Configuration Protocol (DHCP) server:
YES — The IP address is acquired
NO — The set-top is acquiring its IP address
N/A — The value is invalid or cannot be retrieved or DOCSIS is not enabled
Obtain Displays whether the cable modem has downloaded its DOCSIS cable modem
Configuration configuration file from the TFTP server:
File
YES — The cable modem configuration file has been successfully downloaded
NO — The set-top is downloading its cable modem configuration file
N/A — The value is invalid or cannot be retrieved or DOCSIS is not enabled
eCM Registered Displays whether the embedded cable modem has registered with the cable modem
termination system (CMTS):
YES — DOCSIS registration is complete
NO — DOCSIS registration is in progress or the set-top could not register
N/A — The value is invalid or cannot be retrieved or DOCSIS is not enabled
Network Access Displays whether the cable modem has been granted access to the DOCSIS network:
YES — The cable modem was granted DOCSIS network access
NO — The set-top is obtaining DOCSIS network access
N/A — The value is invalid or cannot be retrieved or DOCSIS is not enabled
Initialize BPI The Baseline Privacy Interface (BPI) status:
YES — BPI has been successfully initialized for the cable modem
NO — BPI initialization is in progress, has failed, or was not requested by the network
N/A — The value is invalid or cannot be retrieved or DOCSIS is not enabled
System Up Time The Days, Hours, Mins (minutes) and Seconds the DOCSIS system has been
operational. If the value is invalid or cannot be retrieved or DOCSIS is not enabled, each
field displays zeros.
IP Addresses The Cable Modem and Set-Top IP addresses in dotted-decimal format xxx.xxx.xxx.xxx.
Each byte value is padded with zeros when necessary. For example, 10.0.1.10 is
displayed as 010.000.001.010. If the value is invalid or cannot be retrieved or DOCSIS is
not enabled, 000.000.000.000 is displayed.
MAC Addresses The Cable Modem and Set-Top MAC address in hexadecimal format xx:xx:xx:xx:xx:xx.
Each byte value xx ranges from 00 to FF and is padded with zeros when necessary. For
example,0:0:2D:1:F1:D is displayed as 00:00:2D:01:F1:0D. If the value is invalid or cannot
be retrieved or DOCSIS is not enabled, 00:00:00:00:00:00 is displayed.
Diagnostics
DCT6400 Phase III Installation Manual
4-25