Optimizing The High-Definition Settings - Motorola DCT6400 Phase III Installation Manual

Optimizing the High-Definition Settings

This subsection describes how to optimize standard and HD video settings and closed captioning
based on subscriber preferences.
Before you optimize the output settings:
Connect the DCT6400 to other home entertainment devices
Plug the DCT6400 into a power outlet
Perform the boot cycle
Initialize the DCT6400 and authorize services
Turn the TV on
For an HDMI connection, be sure the TV is on and connected to the HDMI connector before
adjusting the settings. Motorola recommends using HDMI cables less than 20 meters long.
To optimize the output settings:
1
Power off the DCT6400 and then immediately press the
TV is on, the on-screen menu lists the settings you can configure:
> TV TYPE
HDMI/YpbPr OUTPUT
4:3 OVERRIDE
CLOSED CAPTION
SERVICE SELECTION
ANALOG
DIGITAL
FONT SIZE
FONT COLOR
FONT OPACITY
FONT EDGE TYPE
FONT EDGE COLOR
BACKGROUND COLOR
BACKGROUND OPACITY
SETTINGS
RESTORE ALL DEFAULTS
2
Use the remote control or the cursor keys on the front panel to navigate the on-screen
menus:
Press the ▲ and ▼ keys to highlight the setting you wish to change.
Press the ► key to select an option.
To exit the setting and move to another setting, press the ▲ or ▼ key.
If the User Settings menu does not display on the HDTV screen, the TV may not support
the default video output setting. Use the front panel LED to adjust the settings as described
in "There is no video on the TV screen" in Section 5, "Troubleshooting."
USER SETTINGS
16:9
1080I
480I
DISABLED
CC1
PRIMARY LANGUAGE
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
AUTO
Installation
key on the front panel. If the
MENU
DCT6400 Phase III Installation Manual
3-15