D02 Purchase Status; Figure 4-3 Led Display For Purchase Status Diagnostic - Motorola DCT6400 Series Installation Manual

4-4 Diagnostics

d02 Purchase Status

This diagnostic displays the status of subscriber event purchases on the OSD and LED. The
OSD and LED information displays are updated each time this diagnostic is displayed:
PURCHASES
IPPV STATUS:
Figure 4-3
LED display for PURCHASE STATUS diagnostic
The Purchase Status fields are:
Field Description
Unsent The number of purchases in the set-top remaining to be polled. It can be an integer from 0 to
63.
Unack The number of reports that have not been acknowledged by the controller. It is an integer.
Last Seq Num The last acknowledged sequence number of a purchase sent by the controller. It is a 16 bit
unsigned hexadecimal number.
Last RB Time The last time the set-top attempted to report back purchases to the controller, in GPS seconds.
IPPV Status
If IPPV is enabled, the IPPV status indicator LED is on. If IPPV is disabled, the IPPV status
indicator LED is off.
DCT6400 Series Installation Manual
PURCHASE STATUS
UNSENT: xx
UNACK: xx
LAST SEQ NUM:
xxxx
LAST RB TIME: xxxxxxxxxx
Enabled
Purchase indicator
MUTE
On when IPPV
is enabled
P
MUTE
Number of unsent
purchases