Motorola DCT6400 Phase III Installation Manual page 31

3-16 Installation
The User Settings menu options are:
Setting Description
TV Type
Sets the aspect ratio. The LED panel displays the type you select. Defaults to 16:9. Options
are 16:9 for wide screen TVs or 4:3 LETTERBOX or 4:3 PAN/SCAN for standard TVs:
4:3 LETTERBOX fits high-definition programming on the screen by placing black bars at
the top and bottom.
4:3 PAN/SCAN fills the screen by cropping the left and right edges of high-definition
programming.
HDMI/Y Pb Pr
Sets the video display format for the component video outputs. The LED panel displays the
Output
format you select. Defaults to 1080i. Options are 1080i, 720p, 480p, or 480i. For HDMI only,
additional options you can use to display video on a computer monitor are PC1-VGA
(640x480) and PC2-XVGA (800x600).
Some TVs only support certain display formats. Check the TV user manual for more
information.
If you are not using the HDMI connection, the HDMI/YPbPr OUTPUT setting displays as
YPbPr OUTPUT.
4:3 Override
Sets the display format for 4:3 standard-definition programming. If the Y Pb Pr Output is set
to 1080i, 720p, or 480p, this setting defaults to 480i. If the Y Pb Pr Output is set to 480i, this
setting defaults to OFF and cannot be changed. Options are:
OFF displays non-high-definition programs having a 4:3 aspect ratio in wide screen
format. On an HDTV, black bars display on the left and right of the picture. Selecting
OFF for a 4:3 TV may result in a small picture with black bars around it.
480i displays non-high-definition programs in their original 480i format. Some TVs
cannot display 480i format on their component video inputs (Y Pb Pr). Check the TV
user manual for more information.
480p converts non-high-definition TV programs to a higher-quality 480p format. Some
TVs cannot display 480p format on their component video inputs (Y Pb Pr). Check the
TV user manual for more information.
Stretch horizontally stretches standard definition programs across the full wide screen
width. There are no black bars. The video is converted to the format specified by the
HDMI/YPbPr OUTPUT setting. You can select Stretch for TV Type 16:9 only.
Closed Caption
Turns closed captions off or on. The LED panel displays the status of the closed captions.
Defaults to DISABLED. Options are ENABLED or DISABLED.
Service
Sets the service used for closed captions:
Selection
Analog: CC1, CC2, CC3, CC4, T1, T2, T3, or T4. The default is CC1.
Digital: PRIMARY LANGUAGE, SECONDARY LANGUAGE, 3, 4, 5, or 6. The default is
PRIMARY LANGUAGE.
Font Size
Sets the font size for closed captions. Defaults to AUTO. Options are AUTO, STANDARD,
LARGE, or SMALL.
Font Style
Sets the font style. Defaults to AUTO. Options are AUTO, MONO SERIF, PROPORTION
SERIF, MONO NO SERIF, PROPORTION NO SERIF, CASUAL, CURSIVE, or SMALL.
Font Color
Sets the font color. Defaults to AUTO. Options are AUTO, WHITE, BLACK, RED, GREEN,
BLUE, YELLOW, MAGENTA, or CYAN.
Font Opacity
Sets the opacity. Defaults to AUTO. Options are AUTO, TRANSPARENT, TRANSLUCENT,
SOLID, or FLASHING.
Font Edge Type
Sets the edge appearance — AUTO, NONE, RAISED, DEPRESSED, UNIFORM, LEFT
SHADOWED, or RIGHT SHADOWED. The default is AUTO.
Font Edge Color
Sets the edge color — AUTO, WHITE, BLACK, RED, GREEN, BLUE, YELLOW,
MAGENTA, or CYAN. The default is AUTO.
DCT6400 Phase III Installation Manual