Optimizing The High-Definition Settings - Motorola DCT6400 Series Installation Manual

Optimizing the High-Definition Settings

The DCT6400 delivers high-quality component video for high-definition TVs using the Y Pb Pr
(component) and DVI-D video connectors. This subsection describes how to use the on-screen
menu to optimize standard- and high-definition video based on subscriber preferences and
configure the high-definition settings.
Before you optimize the set-top output settings:
Connect the set-top to other home entertainment devices
Plug the set-top into a power outlet
Perform the boot cycle
Initialize the set-top and authorize services
Turn the set-top off
Turn the TV on
To optimize the set-top output settings using the on-screen display:
Power off the set-top and then immediately press the
1
is on, the on-screen menu lists the settings you can configure:
2 Use the remote control or the cursor keys on the front panel to navigate the on-screen
menus:
Press the ▲ and ▼ keys to highlight the setting you wish to change.
Press the ► key to select an option.
To exit the setting and move to another setting, press the ▲ or ▼ key.
If the on-screen menu does not display on the HDTV screen, the TV may be off or it may not
support the default video output setting. Use the set-top front panel LED to adjust the
settings as described in "There is no video on the TV screen" in Section 5, "Troubleshooting."
For a TV with a DVI connection, be sure the TV is on and connected to the set-top
connector before adjusting the settings.
Installation
key on the front panel. If the TV
MENU
DCT6400 Series Installation Manual
3-15
-
DVI D OUT