Accessing Internal Components; To Shout Down The Ir-M1 - Canon FY8-13HR-000 Service Manual

1.3 Accessing Internal Components

Always use the following procedures when opening the iR-M1 chassis.

1.3.1 To Shout Down the iR-M1

1. Make sure that the iR-M1 Info screen reads Idle.
When Printing or Ripping appears on the iR-M1 Control Panel, the iR-M1 is currently
processing a print job. Wait until the job is complete and Idle appears in the Info screen.
2. Press the menu button once, then select Reboot Server. At the next screen, select Shut
Down System.
Shutdown in progress appears on the Control Panel. About 30 seconds later the message
It is now safe to power off the system appears.
3. Power off the iR-M1 using the power switch on the back panel.
4. Disconnect all cables from the back of the iR-M1.
Always obtain permission from the network administrator before you take
the iR-M1 off the network.
Memo
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 NM-PDL REV.0 JULY 2001
CHAPTER 4 DISASSEMBLY/ASSEMBLY
4-3