To Check Motherboard Dimm Connections - Canon FY8-13HR-000 Service Manual

CHAPTER 4 DISASSEMBLY/ASSEMBLY

3.2 To Check Motherboard DIMM Connections

1. Power off and open the iR-M1 as described on page 4-3 and page 4-4.
2. Check that each installed DIMM is locked in its socket. If a DIMM has come loose, re-
lease and reseat it.
DIMMs fit into the sockets only one way. A DIMM is fully seated in its socket when the
levers close securely around the ends. Avoid flexing the motherboard while you insert
the DIMM in its socket.
3. To release a DIMM, push outward on the levers on each side of the DIMM (see F04-
302-01).
Lever
4. Slide the DIMM straight out of the socket.
5. To install a DIMM, slide it straight into the socket and close the levers on each side to
lock it into place.
4-10
DIMM
F04-302-01 Releasing a DIMM
COPYRIGHT © 2001 CANON INC.
Socket notches
2000 2000 2000 2000 NM-PDL REV.0 JULY 2001
Lever