Canon FY8-13HR-000 Service Manual page 69

4. Connect the AC power cable to the power switch (see F04-406-05).
The AC power cable consists of one blue and one brown cable.
• Connect the blue cable to pin N
• Connect the brown cable to pin P
The other end of the AC power cable should still be attached to the power supply.
Chassis ground pin
AC power cable connector
Power supply
5. Connect the ground cable to pin E on the power switch (see F04-406-05).
The other end of the ground cable should still be attached to the chassis ground pin. The
second ground cable should remain attached to the chassis ground pin and the power
supply.
6. Reattach the front panel as described on page 4-7.
7. Reassemble the iR-M1 and verify its functionality as described on page 4-11.
COPYRIGHT © 2001 CANON INC.
F04-406-05 Power switch pins and cables
2000 2000 2000 2000 NM-PDL REV.0 JULY 2001
CHAPTER 4 DISASSEMBLY/ASSEMBLY
AC power cable (brown) on pin P
AC power cable (blue) on pin N
Power switch
Ground cable (green) on pin E
Center frame
4-27