Installing Additional Options; Connecting To The Network - Canon FY8-13HR-000 Service Manual

1.4 Installing Additional Options

If the customer has purchased additional options, install those before connecting the iR-
M1 to the network. For installation instructions, see the documentation included in each op-
tion kit. After installing options, print a Test Page to verify that the system is operating prop-
erly. Checking the installation at each stage allows you to pinpoint the cause of problems
should they occur.

1.5 Connecting to the Network

Ethernet support is built into the iR-M1 motherboard providing connectivity to Ethernet
networks. Supported Ethernet cabling includes unshielded twisted pair for 10/100BaseT.
The motherboard in the iR-M1 has one external Ethernet network RJ-45 port for 10/
100BaseT twisted pair (see F03-105-01). For network configuration information, see the
Configuration Guide.
Token Ring compatibility is available with the optional Token Ring kit (see the documen-
tation included with that kit for more information).
COPYRIGHT © 2001 CANON INC.
F03-105-01 iR-M1 Ethernet network port
2000 2000 2000 2000 NM-PDL REV.0 JULY 2001
CHAPTER 3 INSTALLATION
RJ-45 port for 10/100BaseT twisted pair
3-5