Unpacking The Ir-M1; To Unpack The Ir-M1 - Canon FY8-13HR-000 Service Manual

CHAPTER 2 PREPARING FOR INSTALLATION

3 Unpacking the iR-M1

The iR-M1 is assembled and shipped from the factory in a box that includes all necessary
cables and documentation, as shown in F02-301-01 on page 2-7.

3.1 To Unpack the iR-M1

1. Open the box and remove any packing materials.
Save the original boxes and packing materials. If you need to transport the iR-M1 at a
later date, the original box and packing material will ensure safe shipment.
2. Remove the contents from the top container. Inspect the contents for visible damage.
The contents should include the following items:
• Bags containing the power cable and copier interface cable.
• iR-M1 media package (includes the user documentation).
3. Give the media package to the customer or the network administrator.
Let the customer or network administrator know that in order to take full advantage of
the iR-M1, user software must be installed on all computers that will print to it.
4. Set aside the remaining components from the top container.
5. Remove the top container and any packing materials. Set aside the packing material in
case you need to reship the unit.
6. Carefully lift the iR-M1 out of the box.
If you notice shipping damage to any iR-M1 component, be sure to save the shipping
container in case the carrier needs to see it. Call the carrier immediately to report the
damage and file a claim, then call your authorized service/support center. Be ready to
furnish the serial number, printed on the bottom of the chassis.
2-6
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 NM-PDL REV.0 JULY 2001