Canon FY8-13HR-000 Service Manual page 72

CHAPTER 4 DISASSEMBLY/ASSEMBLY
5. Connect the AC power cable connector to the power supply (see F04-407-02).
The white cable connector is keyed to fit only one way on the power supply pins. The
other end of the cable should still be attached to the power switch.
Chassis ground pin
AC power
cable connector
Power supply
6. Connect the ground cable to the power supply ground pin.
The ground cable should still be attached to the chassis ground pin.
7. Fit the bottom EMI shield into the main EMI shield and secure it with two screws.
8. Reattach the front panel as described on page 4-7.
9. Reassemble the iR-M1 and verify its functionality as described on page 4-11.
4-30
F04-407-02 Power supply pins and cables
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 NM-PDL REV.0 JULY 2001
Power switch
Center frame
Ground cable
Power supply
ground pin