User Menu - Blaupunkt SA 2700 User Manual

The User Menu displays the system basic information and allows you to test system function
Entering User Menu
When the system is in Disarmed Mode (Alarm off), enter your User PIN Code to access User Menu.
Press a numeric key or
E n t e r
Enter the complete PIN code and press OK within 30 seconds to enter User Menu.
The User Menu items include:
Fault Dsp – Fault event display
Log – System event log
Walk Test – Device range test
GSM Signal –GSM signal strength test
P-Mode – Programming Mode for system configuration
Use Up and Down key to scroll through the menu, press OK to select the function.
Fault Display
The system will automatically detect operational faults and records them under this section. Fault
Dsp option will become available only when fault event exists in system, to view the fault events:
1. Use Up and Down key to scroll through the screen and view fault event:
2. Press key to leave, you will be asked whether you want to clear fault display.
3. If you have rectified the fault, press OK to return to Alarm Off mode, and the fault event will be
removed. (Unresolved fault event cannot be removed)
If you want to keep the fault event, press
remain even if it has already been rectified.
Log
The Log memorizes the last 20 system events including

All Alarm Events with Device Information

All Fault Warning Events

All Arming And Disarming Events

The logged events are displayed in reversed chronological order, (most recent event first).

The log is marked with "Start" before the most recent entry and "End" after the oldest entry.

To View Log, use UP and Down key to scroll through the screen and view log, the most recent
event will be at the start

6. User Menu

key
, the display will prompt you to enter the PIN code:
C o d e
 . . .
to return to Alarm Off mode, the fault event will
12