Blaupunkt SA 2700 User Manual page 10

Press OK to continue, enter a 4-digit PIN code. Press OK to confirm.
5.
E x i t S e t u p
R e p e a t
If you are satisfied with current setting, select Exit Setup and press OK to confirm.
If you want to make changes to current setting, select Repeat Setup and press OK to confirm. You
will be returned to the beginning of the First Time Setup process .
NOTE: If no devices are included in the Control,Panel. When you choose Exit Setup, the LCD
will display: Please add at least 1 device. You can either press the learn/test button on
devices to add them, or press Disarm key, enter you PIN code, then press OK to exit the
setup process.
6.
M o u n t
s e e
First Time Setup process is now complete, please see next chapter for device mounting instruction.
S e t u p
D e v i c e s
m a n u a l
7