Blaupunkt SA 2700 User Manual page 13

Door Contact
The Door Contact has two knockouts on the inside of the back cover where plastic is thinner for
wall mounting. (Figure 1) The Door Contact should be mounted on the door/window frame, while
the magnet should be mounted on the door/window.
1. Break through the knockouts; mark the mounting location on door/window frame using the
knockout as template. (Figure 2)
2. Drill holes into the wall, insert wall plugs if required. (Figure 3)
Figure 1
3. Screw the Door Contact back cover onto the wall at marked location, (Figure 4) replace the front
cover.
4. The Door Contact has rib mark on the side that marks location of magnetic switch (Figure 5).
Use the rib mark to align the magnet and screw the magnet on to the door/window (Figure 6).
The distance between the magnet and Door Contact should be no more than 0.6 inch.
Alternatively, you can also use the double side adhesive tape to install the Door Contact.
After finish mounting your devices, the screen should still display:
M o u n t
s e e
Press Disarm key, enter your PIN code, then press OK key. The screen will display Alarm Off
along with current date and time.
The system is now in normal operation and under Disarm mode. For further system setting and
operation, please see following chapters.
Figure 4
D e v i c e s
m a n u a l
Figure 2
Figure 5
10
Figure 3
Figure 6