Envelope Feeder Attachment-C2 (Optional); How To Use The Envelope Feeder Attachment - Canon Color ImageRunner C3380 Reference Manual

Envelope Feeder Attachment-C2 (Optional)

This section explains how to use the optional Envelope Feeder Attachment-C2.
IMPORTANT
The optional Envelope Feeder Attachment-C2 can only be attached to Paper Drawer 1.

How to Use the Envelope Feeder Attachment

The following six types of envelopes can be loaded into the envelope feeder
attachment: COM10 No.10, Monarch: Catalog Glove No.8, DL, ISO-B5, ISO-C5,
and Yougata 4.
If you are using COM10 No.10 envelopes, load them after checking the following:
• Make sure that [COM10] is selected for ENV.1 in Common Settings (from the
Additional Functions screen).
• The guides are adjusted to hold COM10 No.10 envelopes.
7
•
The paper size dial is set to 'Env.', and the size switch is set to 'ENV.1'.
IMPORTANT
•
When you attach the envelope feeder attachment to the paper drawer, do not forcefully
move the front guide of the paper drawer in the wrong direction. Doing so may detach the
envelope feeder attachment from the paper drawer.
•
Do not print on both sides of an envelope. Doing so may cause paper jams, dirty prints,
or make the inside of the machine dirty.
•
Do not load the following types of envelopes inside the envelope cassette. Doing so may
cause paper jams, dirty prints, or make the inside of the machine dirty.
- Curled, creased, or folded envelopes
- Very thick or thin envelopes
- Damp or wet envelopes
- Torn envelopes
- Irregularly shaped envelopes
- Envelopes with clasps or windows
- Envelopes that have already been sealed
- Envelopes with holes or perforations
- Envelopes with specially coated surfaces
- Envelopes made of surface treated colored paper
7-14
Envelope Feeder Attachment-C2 (Optional)