Copy Set Numbering Options
You can specify the detailed settings of the Copy Set Numbering mode for both the
Copying and Mail Box functions. For instructions on using the Copy Set Numbering
mode, see Chapter 4, "Special Copying and Mail Box Features," in the Copying and
Mail Box Guide.
1
Press
Set Numbering Option Settings].
2
Select [On] or [Off] for <Copy Set Num. Op>.
Details of each item are shown below.
[On]: [Full Surface] and [Numbers in 5 Locations] are grayed out, and cannot
[Off]: [Full Surface] and [Numbers in 5 Locations] can be selected on the
(Additional Functions) ➞ [System Settings] ➞ [Copy
be selected on the Orientation and Position Settings screen when you set
the Copy Set Numbering mode. The font sizes of the copy set numbers
are as follows: [Small]: 10.5 point, [Medium]: 12 point, [Large]: 14 point
Orientation and Position Settings screen when you set the Copy Set
Numbering mode. The font sizes of the copy set numbers are as follows:
[Small]: 12 point, [Medium]: 24 point, [Large]: 36 point
Copy Set Numbering Options
6
6-39