Canon Color ImageRunner C3380 Reference Manual page 131

a Platen Cover Type H
The Platen Cover Type H secures the originals
placed on the platen glass. The Platen Cover
Type H is not available for the Color
imageRUNNER C3380i/C2880i.
b Feeder (DADF-L1)
Originals placed in the feeder are automatically
fed sheet by sheet to the platen glass for
scanning. The feeder also automatically turns
over two-sided originals to make one or
two-sided copies. The Feeder (DADF-L1) is
standard-equipped for the Color imageRUNNER
C3380i/C2880i.
c Card Reader-C1
The Card Reader-C1 enables Department ID
Management to be performed automatically.
d Copy Tray-J1
The Copy Tray-J1 provides an additional paper
output tray, and is equipped with the following
features: Collate, Group, and Rotate.
e Paper Deck-Z1
The Paper Deck-Z1 provides an additional
source of paper for printing jobs.
The Paper Deck-Z1 holds up to 2,700 sheets of
paper (20 lb bond (80 g/m
f Cassette Feeding Unit-Y3
The Cassette Feeding Unit-Y3 provides two
additional sources of paper for printing jobs.
Each paper drawer holds up to 550 sheets of
paper (20 lb bond (80 g/m
g Inner 2way Tray-D1
The Inner 2way Tray-D1 is equipped with the
following features: Collate, Group, and Rotate.
o
j
n
m
l
2
)).
2 )).
h Envelope Feeder Attachment-C2
The Envelope Feeder Attachment-C2 can only
be attached to Paper Drawer 1, and holds only
envelopes.
i Finisher-Z1
The Finisher-Z1 is equipped with the following
features: Collate, Group, Offset, and Staple
(Corner and Double).
j Finisher-Y1
The Finisher-Y1 is equipped with the following
features: Collate, Group, Offset, and Staple
(Corner and Double).
k Buffer Pass Unit-E2
The Buffer Pass Unit-E2 is required to attach the
Finisher-Y1 or Saddle Finisher-Y2 to the main
unit.
l Puncher Unit-M1
The Puncher Unit-M1 is equipped with the Hole
Punch mode. The Puncher Unit-M1 can be
attached only if the Finisher-Y1 or Saddle
Finisher-Y2 is attached.
m Staple Cartridge-D3
The Staple Cartridge-D3 can be attached to the
optional Saddle Finisher-Y2 for saddle stitching.
n Staple-J1
The Staple-J1 can be attached to the optional
finisher for stapling (Corner and Double).
o Saddle Finisher-Y2
The Saddle Finisher-Y2 is equipped with the
following features: Collate, Group, Offset, and
Staple (Corner, Double, and Saddle Stitch).
System Configuration
k
3
3-3