■ Hole Punch Mode
The Hole Punch mode punches two or three holes (depending on the paper size) in the
printed sheets.
NOTE
•
The hole punched areas are shown in the illustration below.
3
•
The distance between the punch holes is shown in the illustration below.
IMPORTANT
•
The Hole Punch mode is available only if the Puncher Unit-M1 is attached.
•
Only the following paper sizes can be hole punched: 11" x 17", LGL, LTR, or LTRR.
•
Holes cannot be punched in transparencies, coated paper, envelopes, tracing paper,
labels, or prepunched paper.
•
The machine automatically selects how many holes to punch depending on the selected
paper size.
- Two holes:
- Three holes: 11" x 17", LTR
3-30
Finisher-Y1, Saddle Finisher-Y2, and Puncher Unit-M1
Platen Glass
Hole
Punched
Area
Hole
Punched
Area
4 1/4"
(108 mm)
4 1/4"
(108 mm)
Three Holes
LGL, LTRR
Feeder
Hole
Punched
Area
Hole
Punched
Area
2 3/4"
(70 mm)
Two Holes