Setting The Printing Priority - Canon Color ImageRunner C3380 Reference Manual

Setting the Printing Priority

4
You can set the machine's printing priority. A job that belongs to a function with a
higher set priority is printed after the job currently being processed is complete.
NOTE
Priority printing does not take place until the current job is complete. However, if the
current job is paused, the printing of a job that belongs to a function with a higher set
priority may start, depending on the settings.
1
2
4-42
Specifying Common Settings
● If you want to select the tray home position (when the optional
Finisher-Y1 or Saddle Finisher-Y2 is attached):
❑
Press the Tray Home Position drop-down list ➞ select the tray home position to
be used while jobs are being processed.
Tray Home Position
[Tray A]: Tray A moves closer to the output area.
[Tray B]: Tray B moves closer to the output area.
[Off]: The tray home position is not set. The output tray stops at the
position it is in when printing finishes.
(Additional Functions) ➞ [Common Settings] ➞
Press
[Printing Priority].
Select the printing priority for the various functions ➞
press [OK].
If you select [1] for a function, that function is given the highest printing priority.
[Receive/Fax] appears only if the optional Super G3 FAX Board or Super G3
Multi-Line Fax Board is installed. [Receive] appears only if the optional Super G3
FAX Board or Super G3 Multi-Line Fax Board is not installed.
<Other> is used for setting the priority for printing reports.
PDL prints from MEAP applications are included in <Printer>. However, local
print jobs from MEAP applications are included in <Mail Box>.
NOTE
If the same printing priority has been specified for multiple functions, printing starts
with the first processed print job.