NOTE
•
Before setting <Add. Functions Settings Value>, <Dept. ID>, or <Address Book> to
'Off', it is necessary to set a default key in Network Settings (from the Additional
Functions screen). (See Chapter 3, "TCP/IP Network," in the Network Guide.)
•
Changes are only effective after you restart the machine (the main power switch is
turned OFF, and then back ON). For instructions on restarting (turning the main
power switch OFF and then ON) the machine, see "Main Power and Control Panel
Power," on p. 1-15.
Checking/Printing the Communication Log
You can check and print the following information on the Communication log: Start
time, destination address, delivery result, end time, data content, and end code.
Checking the Communication Log
1
Press
[Device Information Delivery Settings] ➞ [Communication
Log].
2
Check the communication logs ➞ press [Done].
NOTE
To view the detailed information of a communication log, select the log ➞ press
[Details].
Printing the Communication Log
NOTE
For details on the Device Information Communication Log, see "Device Information
Communication Log Report," on p. 9-5.
1
Press
[Device Information Delivery Settings] ➞ [Communication
Log].
2
Press [Print List].
If you want to print the list automatically at a specified time, press [Report
Settings].
(Additional Functions) ➞ [System Settings] ➞
(Additional Functions) ➞ [System Settings] ➞
Specifying Device Information Delivery Settings
6
6-59