Loading Tab Paper Using The Tab Feeding Attachment Kit-B1 (Optional) - Canon imageRUNNER Advance 6275 Basic Operation Gude

Loading Tab Paper Using the Tab Feeding Attachment Kit-B1
(Optional)
This section describes how to load tab paper.
You can load tab paper to the following paper source:
• Paper Drawer 3 and 4 of the main unit
• Document Insertion/Folding Unit-H1/Document Insertion Unit-L1
Only LTR tab paper can be used.
When you load tab paper into the paper drawer, make sure to register the paper type. (See e-Manual > Settings/Registration.)
How to Load Tab Paper
There are two kinds of tab paper: right order tab paper and reverse order tab paper.
Right Order Tab Paper
If you load tab paper into the Paper Drawer 3 and 4 or Document Insertion/Folding Unit-H1/Document Insertion Unit-L1, load
reverse order tab paper face down with the tabs to the left side.
You cannot make copies or prints on tab paper that is loaded in the Document Insertion/Folding Unit-H1/Document Insertion
Unit-L1.
• You can use tab paper set in the Document Insertion/Folding Unit-H1/Document Insertion Unit-L1 for Add Cover, Insert Sheets
or Job Separator.
• If you want to insert printed tab paper as a chapter pages, insert a blank paper where the tab paper will be inserted.
• For more information on selecting the paper size or type of theDocument Insertion/Folding Unit-H1/Document Insertion
Unit-L1, see "Loading Paper into the Document Insertion/Folding Unit-H1/Document Insertion Unit-L1 (Optional), " on p. 81.
1
2
3
4
1
2
3
4
1
2
3
4
Reverse Order Tab Paper
69