Department Id Management - Canon Color ImageRunner C3380 Reference Manual

IMPORTANT
Once you have removed the control card, you cannot operate the machine until the
control card is inserted again.

Department ID Management

This section describes how to change the password and page limit, and how to
check the print totals when the control card is being used.
NOTE
The maximum number of digits that you can register for the password is seven. If you
enter fewer than seven digits, the machine registers the password with leading zeros.
- Example: If <321> is entered, then <0000321> is registered.
Flow of Additional Functions Operations
This section describes the flow of Additional Functions operations when the
optional Card Reader-C1 is attached.
NOTE
Settings specified from the Additional Functions screen are never changed when you
press (Reset).
1
Press
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
in/Out).
The System Settings screen is displayed.
(Additional Functions) ➞ [System Settings].
(numeric keys) ➞ press
-
Card Reader-C1
3
(Log
3-39