Removal Of The Dc Power Supply - Minolta Di152 Service Manual

(4)

Removal of the DC Power Supply

1. Remove the control panel, Front Cover, Rear Cover, Left Cover, and Upper Cover.
9. Remove nine screws and the High Voltage Unit
cover.
10. Unplug two connectors from the High Voltage
Unit.
11. Remove two screws and the High Voltage Unit.
2. Unplug two connectors of the Hopper Assy.
3. Remove two Hopper mounting screws on the
right.
4. Remove two Hopper mounting screws on the left
and the Hopper Assy.
5. Remove three screws and the Power Supply
Right Cover.
D-13