Other Error Codes - Minolta Di152 Service Manual

6.

OTHER ERROR CODES

• When an error that does not fall into the category of paper transport failure or malfunc-
tion, a corresponding error code is displayed in the Display.
4022T505AA
Code
tnr Toner empty stop
nP Paper size is physically changed of
the paper source currently selected
for use while a copy cycle is being run.
Copier does not find paper of the
appropriate size when a copy cycle is
run using the ADF and in the Mixed
Original and Auto Paper mode.
oL Front Door, Right Door, or Side Door
is open.
oU ADF is raised.
oA ADF document take-up door is open.
H11 Scan image memory over
H2 The length of the paper set does not
match that of the paper actually taken
up and fed in.
H3 JS-202 exit capacity exceeded
J9 JS-202 Bin Switching Motor error (Job
Tray is unable to return to its home
position because paper left in the tray)
Description
T-60
Resetting Procedure
• Change Toner Bottle.
• Load paper of the size originally
loaded in the paper source being
used.
• Turn OFF and ON the Power Switch.
• Load the paper source with paper of
the appropriate size.
• Turn OFF and ON the Power Switch.
• Close the open door or lower the ADF.
• Turn OFF and ON the Power Switch.
• Load paper of the correct size again
according to the set paper size.
• Turn OFF and ON the Power Switch.
• For copier tray: Slide out and in the
paper tray in which the size error has
occurred.
• For Manual Bypass Tray: Place paper
in the Manual Bypass Tray.
• For Multiple Bypass Tray: Unload
paper from the Multiple Bypass Tray,
then reload it back again.
• Remove paper that has been fed out.
• Remove paper from the tray.
• Turn OFF and ON the Power Switch.
4022T503AA