Misfeed At Pc Drum J2 - Minolta Di152 Service Manual

3-3.

Misfeed at PC Drum J2

Synchronizing Roller Sensor (PC1)
Fusing Cooling Fan Motor (M3)
TRANSPORT SECTION
Synchronizing
Roller Clutch
Synchronizing
Roller Senser
FUSING SECTION
Fusing Cooling
Fan Motor
Misfeed at PC Drum J2 Troubleshooting Procedures
• Paper is at a stop at the Synchronizing Roller.
Step Check
1 Synchronizing Rollers are dirty,
scratchy, deformed, or worn.
2 Loop length is set to an appropriate
value.
Relevant Electrical Parts
Synchronizing Roller Clutch (CL1)
Master Board (PWB-A)
Result
YES • Clean or change the Synchronizing
Rollers.
• Clean or change the Paper Dust
Remover.
NO • Adjust loop length using Tech. Rep.
Choice.
• For details, see DIS/REASSEM-
BLY, ADJUSTMENT.
T-13
PWB-A
Master Board
PC1 ANODE
4022T523AA
Action