Minolta Di152 Service Manual page 125

<Resetting the Misfeed Display>
Misfeed Location
Misfeed in Misfeed at 1st Tray J01,
the copier misfeed at Multiple Bypass Tray J06,
misfeed at Manual Bypass Tray J06,
misfeed at PC Drum J2,
misfeed at Fusing Unit J3,
paper left J - -
Paper wedged at Manual Bypass Tray byp Pull the paper wedged out of the
Misfeed in the option:
J02, J03, J04, J05, J1, J80, J81, and J83
Resetting Procedure
Open the Right Door or slide out
the 1st Tray, remove all sheets of
paper misfeed and left inside, and
close the Right Door.
tray. (Removing the paper will
reset the misfeed display.)
Remove all sheets of paper mis-
feed and left inside and then raise
and lower or disconnect and
reconnect the option.
T-5