Other Precautions - Minolta Di152 Service Manual

3. Precautions for the Working Environment.
• The product must be placed on a flat, level surface that is stable and secure.
• Never place this product or its parts on an unsteady or tilting workbench when
servicing.
• Provide good ventilation at regular intervals if a service job must be done in a
confined space for a long period of time.
• Avoid dusty locations and places exposed to oil or steam.
• Avoid working positions that may block the ventilation ports of the product.
4. Precautions for Handling Batteries. (Lithium, Nickel-Cadmium, etc.)
• Replace a rundown battery with the same type as specified in the manufac-
turer's parts manual.
• Before installing a new battery, make sure of the correct polarity of the installa-
tion or the battery could burst.
• Dispose of used batteries according to the local regulations. Never dispose of
them at the user's premises or attempt to try to discharge one.
5. Precautions for the Laser Beam. (Only for Products Employing a Laser)
• Removing the cover marked with the caution label could lead to possible expo-
sure to the laser beam, resulting in eye damage or blindness. Be sure to unplug
the power cord before removing this cover.
• If removing this cover while the power is ON is unavoidable, be sure to wear pro-
tective laser goggles that meet specifications.
• Make sure that no one enters the room when the machine is in this condition.
• When handling the laser unit, observe the "Precautions for Handling Laser
Equipment."
6. Precautions for storage the toner or imaging cartridge.
• Be sure to keep the toner or imaging cartridge out of the reach of children. Lick-
ing the imaging cartridge or ingesting its contents is harmful to your health.
1-3.

Other Precautions

• When handling circuit boards, observe the "HANDLING of PWBs".
• The PC Drum is a very delicate component. Observe the precautions given in "HAN-
DLING OF THE PC DRUM" because mishandling may result in serious image problems.
• Note that replacement of a circuit board may call for readjustments or resetting of partic-
ular items, or software installation.
P-4