Removing The Dc Power Supply - Minolta magicolor 7300 Service Manual

FrameMaker Ver.6E (PC) magicolor 7300 ASSEMBLY/DISASSEMBLY
02.08.08
(7)

Removing the DC Power Supply

1. Remove the Controller Box.
D-8(Removal Procedures 1 through 9 for the Control Board)
CNPOW
4134D028AA
4134D021AA
4134D029AA
4134D066AA
2. Disconnect one connector from the Control
Board.
3. Remove four screws, and the Power Supply Box
Cover.
4. Remove four screws, and the Power Supply Box.
5. Remove all of the connectors on the DC Power
Supply.
6. Remove the DC Power Supply Assembly.
D-16