Preface - Alcatel-Lucent 7450 ESS-1 Installation Manual

Ethernet service switch
Hide thumbs Also See for 7450 ESS-1:
Table of Contents

Advertisement

About This Manual
This guide provides site preparation recommendations, step-by-step procedures to install Alcatel's
7450 Ethernet Service Switch (ESS)
well as instructions to install and remove Media Dependent Adapters (MDAs).
After the hardware installation process is completed, refer to the following documents for details
on the boot process, software configuration, and Command Line Interface (CLI) information to
configure system and network parameters:
7450 ESS-1
7450 ESS OS Basic System Configuration Guide
This guide describes basic system configurations and operations.
7450 ESS OS System Management Guide
This guide describes system security and access configurations as well as event logging
and accounting logs.
7450 ESS OS Interface Configuration Guide
This guide describes card, Media Dependent Adapter (MDA), and port provisioning.
7450 ESS OS Router Configuration Guide
This guide describes logical IP routing interfaces and associated attributes such as an IP
address, port, link aggregation group (LAG), systems with IP interfaces as well as IP and
MAC-based filtering, VRRP, and Cflowd.
7450 ESS OS Routing Protocols Guide
This guide provides an overview of routing concepts and provides configuration examples
for RIP, OSPF, IS-IS, and route policies.
7450 ESS OS MPLS Guide
This guide describes how to configure Multiprotocol Label Switching (MPLS) and Label
Distribution Protocol (LDP).
®
Model 1 in a standard 19" utility rack or on a flat surface, as

Preface

Page 9

Advertisement

Table of Contents
loading

Table of Contents