Alcatel-Lucent 7450 ESS-1 Installation Manual page 19

Table 2: 7450 ESS-1 Front Panel and LED Descriptions (Continued)
Key Label/Part
Alarms (cont)
8 Compact Flash #1 (Slot)
9 Compact Flash #2 (Slot)
10 Compact Flash #3 (Slot)
Compact flash locking
mechanism
11 Rack mounting brackets
12 ESD plug
13 MDA (installed)
14 MDA slot cover
7450 ESS-1
Sub
category
Maj • Red: Indicates that a serious condition exists, such the removal of a
power supply.
If there are no major conditions, this LED should remain off.
Min • Amber: There are no conditions defined for a minor alarm.
This LED should remain off.
• Default filename: cf1:
• See the Compact Flash
flash slot.
• To remove a flash card, gently depress the ejector button until the flash
card releases.
• Default filename: cf2:
• See the Compact Flash
flash slot.
• To remove a flash card, gently depress the ejector button until the flash
card releases.
• Default filename: cf3:
• The compact flash card with the boot image and configuration files
should be installed and remain in this slot.
• This slot should be used to download the boot and configuration
images.
• See the Compact Flash
flash slot.
• The ejector button for Compact Flash Slot #3 is slightly recessed.
Insert a small object such as a pen tip to depress the button.
When engaged, the locking mechanism prevents the accidental jostling
or removal of the flash card inserted in Compact Flash slot #3.
Brackets are factory installed to front-mount the unit in a standard 19-
inch wide rack
Receptacle to connect an ESD wrist or ankle strap (with banana jack) to
the ESD connection socket (grounding plug) on the front of the chassis.
Captive screws secure the MDA in place.
For configuration purposes, the left MDA slot is referred to as
MDA slot 1. The right MDA slot is referred to as MDA slot 2.
Captive screws secure the cover in place.
7450 ESS-1 Overview
Description
LED description for the status of a compact
LED description for the status of a compact
LED description for the status of a compact
Page 19