Alcatel-Lucent 7450 ESS-1 Installation Manual page 16

Ethernet service switch
Hide thumbs Also See for 7450 ESS-1:
Table of Contents

Advertisement

Chassis Features
The following example displays the show card command output.
ALA-1# show card 1 detail
===============================================================================
Card 1
===============================================================================
slot card
-------------------------------------------------------------------------------
1
IOM Card Specific Data
Clock source
Available MDA slots
Installed MDAs
Hardware Data
Part number
CLEI code
Serial number
Manufacture date
Manufacturing string
Administrative state
Operational state
Status
Temperature
Temperature threshold
Software boot version
Time of last boot
Current alarm state
===============================================================================
ALA-1#
MDA Slot Cover
The 7450 ESS-1 chassis is shipped with one MDA slot cover installed in MDA slot #2. If this slot
is not immediately populated with an MDA, then the slot cover must remain in the empty slot to
prevent excess dust accumulation and to help control airflow and electromagnetic interference,
and for safety reasons.
MDA slot #1 is shipped uncovered. Install and configure the first MDA in this slot.
MDA slot covers do not have board components or connector pins.
Page 16
card
allowed
provisioned
iom-20g
iom-20g
card
equipped
iom-20g
: none
: 2
: 1
:
:
: Alcatel-xxxx
:
:
: up
: up
: software running
: 42C
: 68C
: TiMOS-B-1.1.I1 both/hops/T2.02
: 2003/04/08 08:58:58
: alarm cleared
admin
operational
state
state
up
up
Copyright *
7450 ESS-1

Advertisement

Table of Contents
loading

Table of Contents