Specifying The Power Type - Alcatel-Lucent 7450 ESS-1 Installation Manual

Specifying the Power Type

If you connect DC power in either the DC/DC or AC/DC models, you must change the default for
the power supply configuration to reflect the DC unit(s) in the CLI in order to facilitate proper
operation for the LEDs, show command, and logging output.Refer to the 7450 ESS OS System
Guide for command syntax and usage information.
CLI Syntax: config>system
Example
The following example displays the
ALA-1>config>system# info
-----------------------------------------------------------------
..
..
-----------------------------------------------------------------
ALA-1>config>system#
7450 ESS-1
power-supply {1|2} {dc|ac {single|multiple}|none}
:
ALA-1>config>system# power-supply 1 dc
ALA-1>config>system# power-supply 2 dc
name "ALA-1"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
power-supply 1 dc
power-supply 2 dc
exit
Connections and Configurations
command configuration:
power-supply
Page 75