Establishing Connections
To establish a console connection:
Step 1
Step 2
Step 3
Step 4
Page 68
Console Port
Figure 17: Console Port Connection
Connect the terminal to the Console port on the front panel
cable.
If you use a null modem cable, make sure that the switch beside the console port is flipped
to DTE when connecting to the serial port of a PC.
If you use a straight-through cable, make sure that the switch is flipped to DCE when
connecting to the serial port of a PC.
Power on the terminal.
Establish the connection by pressing the <Enter> key a few times on your terminal
keyboard.
At the prompt, enter the login and password.
The default login is
admin
The default password is
.
.
admin
ESS1002
(Figure
17) using the serial
7450 ESS-1