Unpacking The Chassis; Unpacking Precautions - Alcatel-Lucent 7450 ESS-1 Installation Manual

Ethernet service switch
Hide thumbs Also See for 7450 ESS-1:
Table of Contents

Advertisement

Unpacking the Chassis

Unpacking the Chassis

There are no field replaceable parts in the 7450 ESS-1 chassis. The IOM, power supply, and fans
are integral to the chassis and are factory installed. AC and DC power cables and MDAs are the
only field-installable and field-replaceable components.

Unpacking Precautions

Review this section to avoid injury or damage to the 7450 ESS-1:
Page 38
The shipping weight of the chassis is approximately 27 lbs. (12.25 kg). To prevent injury
or damage to the router, two people should remove the router from the shipping crate and
mount it into a rack.
The chassis is shipped in a heavy corrugated cardboard container protected by a foam end
caps. Do not discard the packaging container and materials used in shipping. The packing
materials should be re-used if it is necessary to reship the router.
Keep the chassis wrapped in the anti-static packaging until you are ready to install the
router.
Keep the arrows on the shipping container pointing up.
7450 ESS-1

Advertisement

Table of Contents
loading

Table of Contents