Front Panel Features
Figure 1
12
Table 2
Table 2: 7450 ESS-1 Front Panel and LED Descriptions
Key
Label/Part
1
Mgmt
2
Reset
3
Console
4
DTE
7450 ESS-1
displays the 7450 ESS-1 front panel features. Refer to
2
4
1
3
13
Figure 1: 7450 ESS-1 Front Panel Features
displays the 7450 ESS-1 front panel and LED descriptions.
Sub
category
Link
• Amber: 10 M/bps
• Green: 100 M/bps
• Unlit: Operationally down.
• Green (blinking): RX/TX activity.
Data
• Amber (blinking): Error condition.
A recessed button used to restart the SF/CPM. Insert a small object such
as a pen tip to depress the button.
The console port is provisioned with a DB-9 jack and used for the initial
system startup as well as system configuration and monitoring. The
console port, a Universal Asynchronous Receiver/Transmitter (UART)
port, is used for system configuration and monitoring.
Use a EIA/TIA-232 DCE console cable to connect a terminal to the con-
sole port. The factory default baud rate is typically 115.2KBaud.
Flip the switch to DTE when connecting to the serial port of a PC with a
null modem cable. When the switch is flipped to DTE, the console port is
acting as a data terminal equipment (DTE) serial port.
6
8
5
7
Description
7450 ESS-1 Overview
Table 2
for key descriptions.
10
9
14
11
ESS1001
Page 17