Table of Contents
Advertisement
Installing MDAs
Installing MDAs
Warnings and Notes
Danger:
• Only trained and qualified personnel should install or replace this equipment.
• Use of controls or adjustments of performance or procedures other than those specified herein
can result in hazardous radiation exposure.
Warning:
• Electrostatic discharge (ESD) damage can occur if MDAs are mishandled. Always wear an
ESD-preventive wrist or ankle strap and always connect an ESD strap to the grounding plug
on the front of the chassis.
• Invisible laser radiation can be emitted from the aperture ports of an MDA when no cable is
connected. Avoid exposure and do not stare into open apertures.
• Always place components on an anti-static surface.
• Do not power up a 7450 ESS-1 switch until all components are installed and verified.
• Use only approved small form factor pluggable fiber optic devices in MDA ports.
Notes:
General:
• Ports cannot be provisioned until the MDA is provisioned.
• Services cannot be provisioned until the ports are configured.
Page 76
7450 ESS-1
Advertisement
Table of Contents
