Edit Custom Name - JBL SYNTHESIS SDP-40 User Manual

SDP-40
FRONT PANEL DISPLAY
SETUP DISPLAYS FRONT PANEL DISPLAY
Opens the FRONT PANEL DISPLAY menu shown below, which can be used to customize the front panel display.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP SETUP
Default
Parameter Setting
STATUS ALWAYS ON
BRIGHTNESS 75%
STATUS
ALWAYS ON, 2 SECONDS, ALWAYS OFF
SETUP DISPLAYS FRONT PANEL DISPLAY
Controls the activation of the front panel display. When ALWAYS
ON is selected, the front panel display remains activated at all
times. When 2 SECONDS is selected, the front panel display
activates for two seconds whenever a new input source is present
or a new command is received. When ALWAYS OFF is selected, the
front panel display remains deactivated at all times, and will not
reactivate until the STATUS parameter is reset to ALWAYS ON or 2
SECONDS.
SETUP DISPLAY SETUP
INPUTS ON-SCREEN DISPLAY
SPEAKERS FRONT PANEL DISPLAY FRONT PANEL DISPLAY
REAR PANEL CONFIG A/V SYNC DELAY
DISPLAYS DISPLAYS CUSTOM NAME
VOLUME CONTROLS

EDIT CUSTOM NAME

TRIGGERS
LOCK OPTIONS
Possible
Settings
ALWAYS ON, 2 SECONDS,
ALWAYS OFF
100%, 75%, 50%, 25%
STATUS
FRONT PANEL DISPLAY
STATUS ALWAYS ON
BRIGHTNESS 75%
OFF
OFF
BRIGHTNESS
SETUP DISPLAYS FRONT PANEL DISPLAY
Controls the illumination of front panel display characters. When a
setting is selected, front panel display characters automatically
adjust to the selected illumination percentage.
SETUP
ALWAYS ON
2 SECONDS
ALWAYS OFF
100%
75%
50%
25%
100%, 75%, 50%, 25%
BRIGHTNESS
3-46