JBL SYNTHESIS SDP-40 User Manual page 70

SETUP
Setting Crossover Points
LFE
Activates and deactivates the Main Zone audio output connector
labeled LFE.
SETUP SPEAKERS SET CROSSOVERS
When a custom speaker setup is selected:
• Select ON to activate the LFE output connector, configuring
the Main Zone audio output connectors for a 7.1-channel
speaker setup. The SDP-40 sends LFE information to the LFE
output connector.
3-30
(continued from page 3-29)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP SETUP
SYNTHESIS 7CH SETUP SYNTHESIS 7CH SETUP
!CAUTION! !CAUTION! FRONT L/R
PRESSING THE V
CENTER
BUTTON WILL SIDE L/R
AUTOMATICALLY CHANGE REAR L/R
THE OUTPUTS TO A SUB L/R
SYNTHESIS SUB XOVER
7CH SPEAKER LFE
CONFIGURATION ULTRA2 SUB
BGC
ASA
ON, OFF
CUSTOM SETUP LFE
SETUP SPEAKER SETUP
INPUTS CUSTOM SETUP
SPEAKERS
SPEAKERS SYNTHESIS 7CH SETUP
REAR PANEL CONFIG SPEAKER DISTANCES
DISPLAYS LEVELS CALIBRATION
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
M
SUB
80Hz
ON
OFF
80Hz
80Hz
APART
80Hz
CLOSE
80Hz
TOGETHER
MONO
80Hz
OFF
OFF
N/A
APART
• Select OFF to deactivate the LFE output connector, configuring
the Main Zone audio output connectors for a 5.1-channel
speaker setup. The SDP-40 redirects LFE information to the
Subwoofer L/R output connectors. If the SUB L/R parameter is
set to OFF, the SDP-40 redirects LFE information to the speakers
with the lowest crossover point.
SETUP SPEAKERS
When a SYNTHESIS 7CH speaker setup is selected, the LFE param-
eter cannot be adjusted. The SDP-40 automatically deactivates the
LFE output connector and redirects LFE information to the
SubwooferL/R output connectors.
R SR RR
80Hz 80Hz 80Hz
C
80Hz
L SL RL
80Hz 80Hz 80Hz
CUSTOM SETUP
FRONT L/R
CENTER
SIDE L/R
REAR L/R
SUB L/R
SUB XOVER
LFE
ULTRA2 SUB
BGC
ASA APART
SET CROSSOVERS SYNTHESIS 7CH SETUP
JBL
80Hz
80Hz
80Hz
80Hz
MONO
80Hz
OFF
OFF
N/A