JBL SYNTHESIS SDP-40 User Manual page 59

SDP-40
MAIN MENU SETUP
MODE ADJUST INPUTS INPUTS
AUDIO CONTROLS SPEAKERS
SETUP
SETUP REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.
RECORD ADVANCED
SETUP INPUTS DVD1 RECORD ADVANCED
Selecting the INPUT SETUP menu RECORD ADVANCED option
opens the RECORD ADV menu shown above, which can be used to
configure advanced Record Zone input settings.
All RECORD ADV menus are shown in the Appendix on page A-8.
The parameters on the left side of the RECORD ADV menus are
identical regardless of which input is selected. The parameter
settings on the right side are adjustable. The RECORD ADV menus
shown in the Appendix indicate factory-default parameter settings
for each input.
INPUT SETUP DVD1 INPUT SETUP
DVD1 DVD1 NAME
DVD2 DIGITAL IN
LD ANALOG IN
TV ANLG IN LVL
SAT VIDEO IN
VCR COMPONENT IN
CD
2-CH
PVR
D
GAME
TAPE
5.1a
TUNER
MAIN ADVANCED
AUX
ZONE2 IN
RECORD IN
RECORD ADVANCED
RECORD ADVANCED
DVD1 RECORD ADV
DVD1 ANLG IN LVL +0dB
COAX-1 DIGITAL BYPASS OFF
NONE DIG OUT RATE 44.1kHz
AUTO RECORD ENABLED
S-VIDEO-1
1
FILM
5.1 FILM
FILM
5.1a FILM
DIGITAL
DIGITAL
Parameter Possible Settings
ANLG IN LVL -18 to +12dB
DIGITAL BYPASS ON, OFF
DIG OUT RATE INPUT, 96kHz, 88.2kHz, 48kHz, 44.1kHz
RECORD BLOCKED, ENABLED
. . . Configuring Advanced Input Settings continues on page 3-20
SETUP
-18 to +12dB
ON
OFF
INPUT
96kHz
88.2kHz
48kHz
44.1kHz
BLOCKED
ENABLED
3-19