Display Setup; Edit Custom Name - JBL SYNTHESIS SDP-40 User Manual

SDP-40

DISPLAY SETUP

SETUP DISPLAYS
Selecting the SETUP menu DISPLAYS option opens the DISPLAY SETUP menu shown below, which can be used to customize the on-screen and
front panel displays, restore audio/video synchronization, and create and activate a custom unit name.
Default
Parameter Setting
ON-SCREEN DISPLAY Refer to page 3-44
FRONT PANEL DISPLAY Refer to page 3-46
A/V SYNC DELAY OFF
CUSTOM NAME OFF

EDIT CUSTOM NAME

Refer to the next page
A/V SYNC DELAY
SETUP DISPLAYS A/V SYNC DELAY
Restores audio/video synchronization when the SDP-40 is connected
to components such as video processors that introduce video signal
delays. Select a value between 1 and 60ms to activate an audio
signal delay to compensate for the video signal delay.
MAIN MENU SETUP
MODE ADJUST INPUTS
AUDIO CONTROLS SPEAKERS
SETUP
SETUP REAR PANEL CONFIG
DISPLAYS DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
Possible
Settings
OFF, 1 to 60ms
ON, OFF
OFF, 1 to 60ms
DISPLAY SETUP
ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
A/V SYNC DELAY OFF
CUSTOM NAME OFF
EDIT CUSTOM NAME
CUSTOM NAME
SETUP DISPLAYS CUSTOM
Activates the display of the custom unit name, which can be created
with the EDIT CUSTOM NAME drop-down menu. When ON is
selected, the custom unit name scrolls across the on-screen and
front panel displays whenever the SDP-40 is activated. When OFF
is selected, the custom unit name does not scroll across the on-
screen and front panel displays when the SDP-40 is activated.
OFF, 1 to 60ms
ON
OFF
. . . DISPLAY SETUP continues on page 3-42
SETUP
ON, OFF
3-42