JBL SYNTHESIS SDP-40 User Manual page 74

SDP-40
MANUAL CALIBRATION
SETUP SPEAKERS MANUAL
Selecting the SPEAKER SETUP menu MANUAL option opens the MANUAL SPEAKER SETUP menu shown below, which can be used to manually
calibrate speaker distances and output levels. The table below indicates available manual calibration options.
Manual Options
SPEAKER DISTANCES
INTERNAL NOISE TEST
EXTERNAL NOISE TEST
BASS PEAK LIMITERS
MAIN MENU SETUP
MODE ADJUST INPUTS
SPEAKERS
AUDIO CONTROLS SPEAKERS
SETUP
SETUP REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
• Provides manual calibration and individual adjustment of speaker distances.
• Provides manual calibration and individual adjustment of output levels.
• Automatically sends an internal calibration noise signal to each Main Zone audio output connector, allowing
for simultaneous output level adjustment.
• Provides manual calibration and individual adjustment of output levels.
• Requires an external calibration source such as an audio calibration disc.
• Activates an appropriate listening mode based on the current Main Zone input source.
• Provides amplitude limits for low-frequency signals sent to the Main Zone audio output connectors labeled
Subwoofer L/R and LFE as well as low-frequency signals redirected to other Main Zone audio output connectors.
• Protects speakers against input sources that produce low-frequency signal peaks.
SPEAKER SETUP
CUSTOM SETUP
SYNTHESIS 7CH SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
R SR RR
+0.0dB +0.0dB +0.0dB
C
+0.0dB
M
L SL RL
SUB
+0.0dB +0.0dB +0.0dB +0.0dB
Details
SETUP
3-34