Inputs; Speakers; Rear Panel Config; Setup - JBL SYNTHESIS SDP-40 User Manual

SETUP

SETUP
Selecting the MAIN MENU SETUP option opens the SETUP menu
shown below, which can be used to configure the SDP-40.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP SETUP

INPUTS

SETUP INPUTS
Prompts the selection of the desired input (i.e. DVD1). Selecting an
input opens the corresponding INPUT SETUP menu, which can be
used to change input names, assign audio and video input
connectors, select preferred listening modes, and configure
advanced Main Zone, Zone 2, and Record Zone input settings.
Refer to the next page for more information.

SPEAKERS

SETUP SPEAKERS
Opens the SPEAKER SETUP menu, which can be used to configure
the Main Zone audio output connectors for the desired speaker
setup. Refer to page 3-21 for more information.
3-2
SETUP
INPUTS
SPEAKERS

REAR PANEL CONFIG

DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
REAR PANEL CONFIG
SETUP REAR PANEL CONFIG
Opens the REAR PANEL CONFIG menu, which can be used to
configure the analog audio input connectors as eight stereo
connectors or as five stereo and one 5.1-channel connectors. Refer
to page 3-41 for more information.
DISPLAYS
SETUP DISPLAYS
Opens the DISPLAY SETUP menu, which can be used to customize
the on-screen and front panel displays, restore audio/video
synchronization, and create and activate a custom unit name. Refer
to page 3-42 for more information.
VOLUME CONTROLS
SETUP VOLUME CONTROLS
Opens the VOLUME CONTROL SETUP menu, which can be used to
configure Main Zone, Zone 2, and Record Zone volume levels.
Refer to page 3-47 for more information.
TRIGGERS
SETUP TRIGGERS
Prompts the selection of the desired trigger output connector (1 or
2). Selecting a connector opens the corresponding TRIGGER SETUP
menu, which can be used to configure the selected connector for
remote or program operation. Refer to page 3-48 for more
information.
JBL