JBL SYNTHESIS SDP-40 User Manual page 48

SETUP
Assigning Audio & Video Input Connectors
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP SETUP
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.
ANLG IN LVL
SETUP INPUTS DVD1 ANLG IN LVL
Opens the ANLG IN LVL menu shown above, which can be used to
adjust 2-channel analog audio input levels for the selected input.
Despite attempts at standardization, analog sources still have a
wide range of input levels. To compensate for this, the SDP-40
allows independent input level adjustment for each of its stereo
analog audio input connectors. Input level adjustment is not
available for the 5.1-channel analog audio input connector.
3-8
(continued from page 3-7)
SETUP INPUT SETUP
DVD1
INPUTS INPUTS DVD1
SPEAKERS DVD2
REAR PANEL CONFIG LD
DISPLAYS TV
VOLUME CONTROLS SAT
TRIGGERS VCR
LOCK OPTIONS CD
PVR
GAME
TAPE
TUNER
AUX
AUTO, -18 to +12dB
DVD1 INPUT SETUP DVD1 ANLG IN LVL
NAME DVD1 AUTO
DIGITAL IN COAX-1 MANUAL
ANALOG IN NONE
ANLG IN LVL ANLG IN LVL AUTO AUTO
VIDEO IN S-VIDEO-1 AUTO GAIN
COMPONENT IN 1 dB L C R
0
2-CH FILM
-6
D 5.1 FILM
-15
X X
-30
FILM
5.1a 5.1a FILM
-45
MAIN ADVANCED
ZONE2 IN DIGITAL
RECORD IN DIGITAL
RECORD ADVANCED
Parameter Possible Settings
AUTO ON, OFF
MANUAL -18 to +12dB
AUTO GAIN* -18 to +12dB
* This parameter cannot be adjusted.
Note:
ANLG IN LVL menu adjustments are applied to the
stereo analog audio input connector assigned for the
selected input. When another stereo analog audio
input connector is assigned, these adjustments are
automatically applied to the new connector.
ON
OFF
OFF
+0dB
-18 to +12dB
+0.0dB
SL SR SB LFE
X X X X X
JBL