JBL SYNTHESIS SDP-40 User Manual page 120

MODE ADJUST
5.1 MONO SURR
MODE ADJUST 5.1 MONO SURR
• Designed for playback of Dolby Digital mono sources.
• Sends mono sources to all channels.
Parameter
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
5.1 MONO
MODE ADJUST 5.1 MONO
• Designed for playback of Dolby Digital mono sources.
• Sends mono sources to the center channel.
Default
Parameter Setting
SUB L/R LVL +0dB
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
5-22
Possible
Settings
OFF, -30 to +12dB
DECODING
and listening mode names differ depending on the
encoding present in the input source, the
setting, and the speaker setup. The table at the top of the next
page indicates the conditions in which dts-ES decoding is engaged.
• listening modes are available when dts-ES decoding is not
engaged.
• dts-ES decoding is not engaged when the
parameter is set to OFF or when the
is set to AUTO and a 5.1-channel dts source is detected.
• listening modes are available when dts-ES decoding is
engaged.
• dts-ES decoding is engaged when the
parameter is set to ON or when the
is set to AUTO and a 5.1-channel matrix-encoded or a 6.1-
channel discrete-encoded dts-ES source is detected.
• listening modes are not available unless both side and
rear speakers are present.
Note:
The table at the top of the next page is not applicable
to the ,
MUSIC listening modes.
JBL
DECODING parameter
DECODING
DECODING parameter
DECODING
DECODING parameter
ULTRA2, and